1. Den of Angels is closing in August 2026. New account registrations are closed. Please see this thread in Den of Angels news for important information: /threads/the-future-of-den-of-angels.893314/
    Dismiss Notice

Alchemic Labo Unoa Discussion Part 6

Nov 9, 2005

    1. My Lusis arrived yesterday and I love the fact that she is already assembled. She poses beautifully which makes me feel a little reluctant to pull her apart to remove her seam lines. Has anyone considered not removing the seam lines? I'm debating if I should or not.
       
    2. Sienna, I wet sanded the sharper edges off but resisted going further because I did notice very tiny bubbles along the edges of the ankle-foot joint. Was afraid of exposing bubbles if I went too deep!
       
    3. Sienna, I feel the same way - I took her apart to change the chest plate, and found it quite an adventure. But I will again disassemble her to glue together the upper leg part (cap - looking ). I find that I'm almost doing damage right now by not doing it sooner because when I sit her down/up, it pops out...
      When I do that, I think I'll also do body blushing and cover the whole body with MSC, so taking her apart will happen only once or so
       
    4. I'm disassembling my Sist right now. Her leg washers seem to be firmly in place, like they've been screwed in or something. I'm noticing little engineering improvements here and there. She should be called the unoa 1.75.


      Sent from my iPhone using Tapatalk
       
    5. I was up till 1am yesterday finishing up her sanding, spraying, blushing and faceup

      [​IMG]

      She could benefit from some light eyes, I think :). Lovin her, still no name yet.
       
    6. [​IMG][/URL][/IMG

      Here is my first Unoa Lusis, she arrived this past week. I can'd decide if she is going to be named Frith or Selah and obviously she needs her faceup.
       
    7. *heart stops* Oh YamamuraTatsuya, she is gorgeous :O :O :O Phenomenal face up!

      I was wondering if it was still possible to get any high heeled feet for Unoa 1.5(eh, what version should the Sist/Lusis be now!?)...I read that they existed for 1.0 and 1.5 but that post was in 2007 -_-"""
       
    8. Snowfern: The heeled feet for 1.5 should still work for these girls. I know they still fit my fairy from the old ones back from 2007? Noppin is still selling those right now, so you can still snag those if you want them.
       
    9. I would have picked some up if I had seen the high heeled resin feet on noppin as well! Gamekitty, where are they listed? I only see the mule soles.

      Congratulations on all the new arrivals!
       
    10. wondering about high heeled feet too... can see only mule soles :(
       
    11. I didn't see them is why I was wondering, or I would have picked up some as well! :(

      heheh I see I'm not the only one :( I also wish they had the fresh skin pointing hands but they didn't reply my enquiry during checkout....oh well, I'm still happy, just curious!
       
    12. Oh... heeled feet. Sorry :X I looked at it wrong. The last time I saw those it was at noppin. My mistake. I read it wrong. I thought they were only available for 1.0 dollies?
       
    13. OMG, YamamuraTatsuya, she is BREATHTAKING!!! Wow!! I absolutely adore the way you painted her, and your chosen color palette -- she looks amazing! :D

      Snowfern, unfortunately, for whatever reason, high-heeled feet were only made for Unoa 1.0 -- you can find them in the MP and on Y!J sometimes (I'd suggest putting up a WTB in the MP), but they're pretty scarce. I only had one pair for 8 years, until a friend sold me another pair this past winter.

      I had an upper limit that I was willing to pay for them -- some people did have them for sale in the intervening years, but they were pricey. I'm glad I held out until I found them for a price that worked for me.

      Good luck, and sorry to be conveying bad news! I wish they'd produce new HH feet, they look unique from every other type of shoe that these girls can wear, AND they tend to stand really solidly in them, AND while I'm at it, I wish they made Unoa high-heeled *arched* feet that could wear all the pretty heeled shoes that Narae and MiniFee can wear.

      I'll have to try a pair of Narae and MNF-without-magnet feet on one of my girls, to see if they'll fit in the ankle area and if they'll stand. (The resin wouldn't match, but it would mean they could wear high-heeled boots!)

      -- A :aheartbea
       
    14. Gamekitty, no sweat! I guess I'll have to seek alternatives.....

      Ashbet, wow ....Thank you for the info! I had been wondering if the MNF HH feet would be a decent substitute. ...I eagerly await the results of your experience! !!!
       
    15. Thanks guys! I really like how she came out. The sore neck at the end of the day was totally worth it :3

      Good luck finding the heeled feet!
       
    16. YamamuraTatsuya, she is gorgeous! I love her style and expression and pretty much everything XD

      I got my fairy girl today and oh my gosh I love her color! She is so beautiful and tender and more than I could have wished for. All extras I ordered were as they should have been, so I am more than happy.
       
    17. Hei!! Today I discovered MSD boy jeans wear very well on my unoa sist. Jeans are from Alice collection boy section.

      [​IMG]
      IMG_9867B por yotsuba_amai, en Flickr
       
    18. I still need to pay the hefty customs charge on my girl. :sweat I will be doing that very soon! She'll probably come next week.
       
    19. Ooo, she is so pretty! Reminds me a bit of Lily Cole.
       
    20. ohhhh kkerrin ! I love freckles and I LOVE the natural look of your doll! ahhhh!
      Yotsub@ very pretty for a casual day out! ^_^
      [​IMG]

      she's getting clothed....slowly....
       
    21. I'm getting a little bit upset with AL at the moment. I sent my proxy a photo of the problem with the fist hand, they said they requested a better photo. So I sent lots of photos explaining the issue with the hand, now the proxy is telling me AL don't understand the problem, but they will try and explain again.

      If they've had to replace the exact same hand for aikoe why would they not be able to connect the dots and see that it's a flaw in this set of hands and needs replacing? :( I'm starting to feel like they do not want to replace the part for me because I did not go through Noppin or something. There's no way this hand can be used. I've even tried to fix it but the bar won't go through the other end. I think it's a bit unfair to ask me to fix the hand myself when they have replaced the hand for others. x_x

      Maybe I'm not explaining it properly? I just basically said the pin is loose so it comes out, and is bent and doesn't sit in the hole on the other side. Exactly what aikoe said here pretty much. I sent loads of photos showing the difference between the two hands as well.
       

    22. Im so sorry you got to experience this! I really hope they see and understand the problem and send you a replacement!
       
    23. Did anyone else order cat ears? Or do you have older cat ears you have tried on these Unoas from recent preorder? Mine don't seem to fit at all :< The little nubs in the ears don't have any place to lock and when I try to put them to the head, they just dislodge the faceplate. Is the headback different now and the ears old model? >>
      And even the faceplate that came with the body is quite so-and-so with the fit.. older one keeps popping off even more. Guess I'll have to do some heat shaping before faceupping. A shame, since the FPs fit perfectly on headback made by another doll hobbyist.

      eerka - Your sist is so pretty and unique! It's always nice to see successful Unoa mods ^^
       
    24. Thank you, I hope so too. It's just frustrating because the pin/bar shouldn't be loose and bent on a new pair of hands. :(
       
    25. Rinoa: I hope you get your problems fixed too!

      It is nice to see new girlies here. I got one to share too! It took a long time, but I finally have my Victoria almost completed. She is an Unoa Lusis Fresh skin girl. She looks a porcelain doll here! I love it! All she needs now is some eyelashes and she will be done!

      [​IMG]
       
    26. Thank you! I just hope it's a misunderstanding with communication from the proxy (who, obviously don't know about BJDs very well compared to Noppin) as opposed to just trying to ignore the problem. Though the photos are quite clear without words.

      Your girl is stunning btw! :)

      I still have to pay off the charges for my Fairy Skin Lusis. *_* I'll be doing so and getting her next week.
       
    27. Whee, crossposting spree. Just so happy that I have a complete Unoa now. This FP needs a new face-up though since it's blushed way too dark. The Sist FP needs some serious heat shaping, poor thing doesn't sit well at all ;_; I'm glad that clothes sewed for MNF fit well on the small bust Unoa too.

      [​IMG]
       
    28. I love L-bi girls! Yours is so gorgeous! I need to sand the eyebrow from mine and give her a faceup.
       
    29. Sigh. AL have said they'll replace it, but they want me to return the item? I have to pay shipping to the proxy and shipping to them then shipping back. It just isn't worth it as it'll cost me almost the same price of the item to return it. :( I've asked to see if they can get me at partial refund and I'll keep the broken hands but I have a feeling they'll refuse. I'm really surprised AL wanted the part back. It'd be better trying to fix them and sell them and buy the parts again myself.

      I guess maybe they favour Noppin when it comes to replacements, since they obviously have a deal together. I guess this is a lesson learned? If I want cheaper shipping and marked down customs, I gotta expect AL to want returns if anything is broken.
       
    30. @Rinoa :( I hope you manage to fix it....I know a number of Japanese companies do not like dealing with international customers due to language issues...perhaps why AL chose to work with Noppin instead, hence the roundabouts :((

      I was prepping my sist decadent for a face up today, and spotted what I thought was a spot of dirt or dust, but when I tried to remove it, it was stuck. Turns out there was a bubble right at the edge of her upperlip, near the cupid's bow!!! :(

      [​IMG]

      I have also noticed while sanding the seams of the ankle part of the calf part that it had small bubbles...I wonder if this resin has a tendency to bubble at thinner parts? I decided not to trade it in but take the opportunity to mod it, will upload pics when that's done. the bubble was at least 1/2 mm deep and so had to do a painful job of carving and hoping there weren't more bubbles >&#9675;<

      On another note, the faceplates don't fit well at all as highlighted by a number of members in this thread...I wound up sanding and carving quite a bit off the neckpiece and back of faceplates to fit. Wish I had read about the heatshaping (?) method before sanding :-/ Has anyone had success with it so far?
       
    31. Gosh it seems like AL are having a few issues. I know Unoa's do have airbubbles, the Unoa boy body of my Sist boy had one when I lightly sanded him which annoyed me. But an airbubble on the faceplate is really bad. :(

      The proxy said they will see about getting a partial refund or getting a replacement without returning so we'll see what they say. I'm not too upset. It's not like a broken finger I have to re-glue or anything so I'll figure something out if it comes down to it. I'm just confused as to why AL treat their customers differently, but I'm guessing it's because of their relationship with Noppin.
       
    32. I used heat shaping with my previous Elder sister hybrid, her faceplate didn't fit the headback at all. It worked great, I dipped the faceplate to hot water, waited until the resin was bendable and then put it carefully on the headback, bending it slightly so that it fit the headback as planned.

      Sorry to hear of the problems, you guys :( So far I haven't noticed problems with my girl other than a noticable air bubble in L-bi faceplate's lower eyelid, but I haven't played with her much so there may be unpleasant surprises hidden somewhere.
       
    33. Ooh thanks Uninu! I didn't know it would be that easy...I was afraid the face would distort...heheh

      [​IMG]

      I accidentally scratched Saffron Ver 1.0's faceup :((( so I decided to do ALL the faceplates haw haw it's late and I need to do eyelashes...but wanted to show the mod for the sist decadent. the upper lip was filed down to remove the bubble, then I decided to widen the mouth to make her smile a little. Not too noticeable difference I think.....daren't mod too much lest I find more bubbles sigh..
       
    34. Those all look beautiful!

      Some of my faceplates have been a little rough to fit, but not enough to concern me.
       
    35. There's so many amazing Unoas.... I don't even know where to begin. :P

      Snowfern - SO many congratulations!!! She is so extraordinary. :aheartbea Best of luck with the bubbles. :/ How frustrating to have to deal with that.
      eerka - Amazing!!! Such a happy face, I love her! :D
      KiSSATEN - Absolutely gorgeous. I really love her expression. The outfit fits wonderfully! :D
      Gamekitty - So sweet! She looks like the character in the background.
      kkerrin - She looks so alive. :o Breath taking.
      Yotsub@ - Thanks for sharing! Those pants look fantastic.

      Here's a moment of Tiger (B-El)...

      [​IMG]
       
    36. Congrats on everyone receiving their Unoa's. I'm sorry to hear about the discrepancies. I hope they get sorted out soon! It's exciting to see that the unoa's are back and people are posting more and more about them. It went quiet for a while there :) So glad to see all these new dollies and old ones.

      Snowfern I love the face up you've done on your Sist. She looks so unique!

      eerka That is such a cute mod job! She looks like a whole different unoa faceplate.

      Gamekitty Your Lusis does look like a porcelain doll. Did you do the face-up? It looks great. I love her eyes.

      KiSSATEN So happy to see another L-bi girl :D She's adorable!

      DenaliWind He is my fave B-el so far! I love how unique and animalesque all your dolls look :) So nature-y.

      I recently took Pollen to a doll meet and got her all cute looking.

      [​IMG]
       
    37. So my proxy came back with one final message and I actually can't believe it! The reason they want me to return the item is because people have been getting photos of damaged items from other people so they can get a free new item. I have to say I am shocked that anyone would do that, especially to a small family run business who have always been so customer friendly.

      I would happily return the part, but it isn't cost effective. I'm going to try and fix it and may possibly sell and re-buy when I order again. I'm no longer upset at AL now as I completely understand why they'd want me to return the item.
       
    38. If that's the case, can't you take a photo that shows the hand as well as a slip of paper with your name and the date?
       
    39. It's terrible that a few greedy people can ruin things for everyone. :(
       
    40. I was thinking that, and asked the proxy before I sent another message saying I'd leave it. I think even that might not be enough. It's possible people are getting photos from friends who had broken parts so they could just write the name and date and take a photo?

      I could try. I might just send one final message with that on, but at this point I'm not too bothered about trying to fix it or sell it as is.

      sealion - I agree. It's a shame that AL have had to become distrusting of their customers.
       
    41. Yep, I was right. No matter what they need the part returning. Ah well. I'm just going to try and fix it.

      In other news I'm ready to pay the charge on my Lusis and have now realised she won't come till Tuesday. :doh Wish I could have paid a day or two sooner.
       
    42. Just wanted to share my Unoa L-bi. She got her face-up redone recently. At first I wasn't happy with it at all, but she's finally growing on me again :)

      [​IMG]New Petal by helloo_sunshine, on Flickr
       
    43. Helloo_sunshine she's soooo pretty >w<)/

      Guys, I don't know if anyone else mentioned this yet, but while poking around AL's site, I found this:

      The boys haven't been released in fairy skin yet right? So I'm guessing this is the color they'll come out in this time o^o Below them, there is Zest and Xyle too, Belia and Ange and the girls in both Fresh and Fairy (which have already been released though, right?)
      There are not dates other than what is above all that (but talking about some events I'm guessing you need to be there in person? and something about b-grades) that they're all in 2014 so I don't think the rest of the information on that page is old either.
       
    44. I mentioned this earlier actually, all the skin tone for boys are going to be released this year. :) And I thought the boys were released in Fairy Skin before, but maybe not as I don't think I've seen a Fairy Skin boy body, just the faceplates.
       
    45. Rinoa I saw you mentioned they'll be rereleased, didn't see you mention the skin tone! xD I don't see anything about them being released in Fresh Skin though ono The Fairy Skin is pretty recent and since the boys haven't been released in...what? 4? 5? years? I don't think they've had a different color release, I might be wrong though!!!

      totally OT, but I'm replaying P3 -u-
       
    46. Gah, I'm replaying P3 Portable. XD I love this game.

      But yeah, I think I just mentioned the re-release :sweat This is where I saw it:

      http://web.alchemiclabo-eshop.com/e...d=3&scid=&mcid=&me=&vmode=&view_id=UABB-102FR

      On the Fresh Skin page it says "Re awaiting production (early summer 2014 schedule)"

      Where did you get that part you posted? I can't find it and Google Chrome is refusing to translate the pages for me. :sweat
       
    47. Rinoa Chrome refuses for me too -3-)/ I got it from here: http://alchemiclabo.cms.drecom.jp/event_booth Maybe the whole page is talking for an event you need to be in person though @_@ Hahaha...it's hard to understand what is going on on his site...(also, we are looking at different sites? O3O;; ) If Noppin gets any, I really hope it's Fresh Skin anyway X'D

      (gahh I played it like aeons ago when my bro rented it, so I played for a week and reached till Lovers' Arcana, now that my roomate has a PS2 and FES, I got to playing it 8) Huhuhu~ I totally wanted the portable version so I could date all the cuties UAU)
       
    48. Happy Easter to you all :) My Lusis and Sist-Rosette-Hybrid want to greet the Unoa thread! (Sorry, Lusis doesn't have a face up yet...)

      [​IMG]
       
    49. Hey again, I'm still on my quest for alternative high heeled feet for fresh skin Unoa Sist body....if I can't figure out an alternative, I might get a whole body with high heeled feet option from another company...T.T I cannot imagine a burlesque performer who only wears flats!! >~

      Edit: I have found high heeled feet off Little Monica site...

      http://dec89229.gdreamweb.com/shop/step1.php?number=1392&b_code=B20090616064250

      Am curious if the feet would work with the Unoa body!! Augh dying here.....
       
    50. My Lusis arrived today! My gosh the skin colour is gorgeous! *_* I put her next to my oldskin girl body and just, wow. She's so pink and pale and beautiful. I'm so glad I got an orange wig with her too! XD

      I need to restring her with the large bust part soon. I'm so happy to finally have a fairy skin Lusis!
       
    51. ^w^ Aww, yay! Congrats Rinoa on her arrival!

      ---

      TwT I finally began sanding the sculpted eyebrows off my Sist's faceplates today. I stilllll need to do more sanding work on some of the body as well though. Sanding my Unoa has been more difficult than most of my other dolls for some reason though...maybe the resin is stronger or something? My Sist's character really isn't very fond of clothes either, so that means I really have to get them perfect. OTL
      I've been taking my time with my Sist's though. I still don't think i'm quite over the shock of owning one yet, so i've been kind of intimidated to work on it. I'm glad i'm finally making more progress on him now though!
       
    52. Snowfern: If you do ever get those feet let us know if it works out!

      Yay Rinoa! Congratulations on your girl!

      Arkelle: Can't wait to see what your Sist would look like once she is done!

      Today my 3 girls wanna come out and say hi on this lovely spring day. It is the first time I had them all 3 posed together with clothes. I need to take my girls out more often.

      [​IMG]
       
    53. Gamekitty, your trio is gorgeous! I love their faceups, and the contrasting skintones.

      A lot of new kits coming in!! Congratulations to all, please, some more spam :)

      I got some good news yesterday. I was at an event here in Osaka, and had a chance to speak with AL staff. They are so nice and awesome!! If I'm not mistaken there might even be a second preorder for unoas later this year, as they are trying to make production more regular and the dolls more available. So those of you who missed out this time, there is still hope!

      The AL booth also had a "play corner", where you could see the different series and play with them! It was amazing to see a box full of unoa dolls. :fangirl:

      [​IMG]
       
    54. I'm so jealous you got to meet them and see all the unoa's!
       
    55. Aaaawww, boxes full of unoas, what a sight!!!


      Gamekitty, you have three very lovely unoas!!!
       
    56. I made her face up again!! Because I don't really liked the last
      Still I don't find name for her T__T
      [​IMG]
      IMG_9943 por yotsuba_amai, en Flickr
       
    57. Yotsub@~ She's so beautiful! ^~^ Great Job on her faceup!
       
    58. Yotsub@ - Beautiful faceup! I really love the colors, she's so fresh! :D

      DaggerChan - Now that looks like a fun day!