Fairyland Pukifee discussion part 27

I'm not sure I understand how that might've happened. Even if the doll was crushed, how could the sleeping faceplate be damaged in transit? Fairyland boxes are so sturdy!
Open eyes faceplates arrive on the doll, so
wasn't the sleeping faceplate (the damaged one) wrapped in something, or was it just floating unwrapped inside the Pukifee box? Could it be black from the velvet covering the inside of the box?

 

The black marks may have been from the foam liner that is inside the box, they may come off with a soft soft cloth and a smidge of water. Years ago it used to happen much more frequently if I remember correctly. Most were removed without damage to the face-up.

 

Her face plate wasn’t wrapped or escaped the wrapping.

Luckily a light swipe with magic eraser removed all the marks and her face up is fine. That’s a scary prospect.

 

I've had dolls get smudges from the black foam liner too.

 

I did it, I caved and ordered a PKF Jude!!! I couldn't resist that cute little face I even did a mock-up (not a very good one but it was late) of her as my new Mya. She will still go on the RLF body though...
jude mya by Ban, on Flickr

 

Hello there, I'm baaaack! After years of NOT having a pukifee and collecting MSD dolls I ordered a pukiFee Rosanna in tan yesterday. I missed all those tinnies in my life! it's sooooo wonderful to be able to watch yours again! I hope the waiting time will not be too long

 

I've taken the plunge and ordered the Pukifee Tika I'd wanted to join Pukifee Rin.

He's going to be in Tan, but I'd been hunting for maybe a couple of years now and hadn't spotted him in NS, so I had to snap up the opportunity.

 

Was tempted by Jude, but only because I love those little toothy pegs! No dolly dosh though, so haven't ordered . . . figured I really have enough PukiFees anyway.

 

Does anyone know if it’s possible to get hold of replacement parts of legs for pukifee ? My pukifee has got a damaged thigh and it makes standing difficult.

 

I would try to get a good picture of the damage and contact Fairyland.

 

If it arrived from Fairyland/DDE damaged then they can usually help replace it, but if it's been damaged since purchase then you might not have any luck. There are sometimes full bodies for sale, but it's very rare for anyone go sell just the legs unless they're making a hybrid.

 

Thank you for replying. Unfortunately I have had him for some time and it was damaged at home.

 

Thanks for replying. I guess I’ll have to look out for a full body.

 

Or you could buy a full Pukifee a la carte, with say a Shiwoo head, and then sell the head in the Marketplace here, or list the split for the head in the Marketplace, (and PM me when it's there ) as there's always people looking for heads.

 

Or you could offer a split in the marketplace! Say you really only need the legs. Someone may want to make a mermaid!

 

Congratulations! I'm so happy to hear that there will be another Tika. I don't see many photos of him here. I have one in NS.
Btw how did you manage to order him? Rin and Tika are not available in a la carte.

 

Denver Doll actually had one fullset left in stock, I don't know how, but I knew I needed to order him the moment Shannon told me!! I've made the first layaway payment so that little beauty is mine

and yeah, there are so few owners photos around, which is crazy as I'd presume there are as many Tikas as Rins out there.

I'm going to open eye mod his sleeping head, and buy a second body later, and then I'll have a pair

 

Lucky you! I'm so happy for you. And I can't wait to see some pictures of your lovely pair!

 

I finally got my first PukiFee secondhand, and I love her! She won't be my last pukifee. However, she has no face magnets. The faceplate stays on with eye putty, but does anyone know the exact faceplate magnet size - width and depth? I've been searching for days but haven't seen her magnet size posted anywhere.

 

The magnets I got with my Zoe are 5mm wide and 3mm deep. There are a lot of people who have had to enlarge the holes for the magnets.

 

Thank you Nancy! ❤️

 

Has anyone tried 8mm eyes in pukifee Rin? Or even 10mm?

 

@stelladolls My Rin wears 10mm. I do not think 8mm would be big enough.

 

@Redfaery do you have a nice clear picture of her eyes?

 

I've used 8mm Brilliant Glass eyes in more than one of my PKFs. I like the extra white showing. This is Zephyr with 8mm.
Zephyr by Beth Simmons, on Flickr

 

I love the look of the 8mm. I have a rin coming and I bought her some 8mm but now I am sure that it’s perfect for her. Thanks @LadyMadrigal !

 

She is adorable, and I love her little dress.

 

My little Ante wanted to pop by and say hi

 

What an adorable girl and dress!

 

Thank you so much

 

Does anyone here use 12mm Mako eyes in their pukifee? I found a pair of eyes from that company that I love but I'm not sure if they'll fit?

What are everyone's favorite eye companies for their pukifee? Thanks

 

My Jude arrived today. I was getting a little frustrated trying to figure out who Jude was. We landed on this, but I'm still not sure. Went back and forth boy, girl, gender fluid clothes...blonde/red/brown hair, blue/green/grey....then I stole these eyes from another doll and put this discounted wig that I had laying around on her and trimmed it. We will see how long Jude lasts. I think the color of the eyebrows is throwing me off a bit, so I might have to try and darken them.

Fairyland Pukifee Jude by Andrea, on Flickr

 

Such a sweet face. I'm sure you will come up with the perfect combo. Let's see her as a he to help.

 

Thank you! I hope so! We did a little photo shoot. Didn't really help me.
Pukifee Jude Boy or Girl? by Andrea, on Flickr

 

I really like the curly wig!

 

You got your Jude??? Congratulations!!! She's even sweeter in owner photos.

Did you order just Jude or the fullset?

 

Andrea,
I like the straight wigs but, with that in mind, hard to determine if should be a boy or girl. I have a littlefee that's a tomboy. Maybe that would help.

 

I prefer the straight wigs. That said, I like little Jude as both girl and boy.

 

Thank you! I bought it on a whim when I was buying something else because it was so discounted.

Thank you! I just bought a basic Jude.

Yes, I was thinking maybe a tomboy.

I still can't decide. I just ordered a short bob, will see if that helps me decide.

 

I have to admit I am super jealous, I ordered a full set Jude and it has yet to arrive! I absolutely love yours. Personally I find the sculpt more feminine, but either way really looks great!
Please spam more Jude pictures. I am dying waiting for mine.

 

The bottom right corner wig looks precious to me.

 

I love that dolls are so easily gender fluid. If it doesn't cause anxiety, maybe keep them fluid or flux? ❤️ They look cute in all those clothes and wigs! ☺️✨
Congrats on your great doll!

 

I was surprised at how fast she arrived! I hope your Jude arrives soon!

Thank you! I really like the color of that one.

Thank you! Yes, I think I will keep my options open, but for now I've gone with girl and named her Tallulah, Lulu for short.

Pukifee Jude

 

Your Jude is adorable, still waiting on my tan Jude & 2 others to arrive so seeing pictures of the sculpt makes me so excited to receive mine, I love the curly wig on them!

 

Hi guys! My first pukifee just came in. She's a Mio and I'm in love But, what eye size does she wear? Thanks!

 

8mm-10mm will work, depending on how much white you want showing. I like a little more white because it keeps the eyes from turning into black holes in photos.

 

Thank you!

 

Congratulations on your first pukifee rachxoxo.

 

I went to look for clothes for another incoming doll and ended up with a set of Sylvanian family bunnies. I figured the smaller bunnies' clothes would fit the new doll, and that the bigger ones would fit Sibyl. 3/4 of the outfits fit Sibyl, though! Not perfectly, but better than I expected for sure. I bought it for the dresses, but I actually really, really like the "dad"'s outfit on her!

 

Little Jude arrived on Monday-such a sweet little face! PukiFee Jude by Rosanne, on Flickr

 

Congratulations! He looks lovely! Will you keep him as a boy?

 

Congrats @sweetiemom! He's adorable, and the outfit works as well for a girl as a boy.

 

Squeee, how cute! I just paid off my Jude. Mine will be a girl though

 

Jude is here! I absolutely adore her!

 

I just love her teeth. How did I miss her?

 

Absolutely adorable!! Congratulations on this sweetie.
They look cute in peachy resin too~~~ I had been curious.

 

Ohhhh, Jude as a little girl is so cute too!

 

Omgosh all the little judes! I'm completely done for! I have been waffling back and forth on Vanilla and Jude and now I'm really waffling...

 

They arrived during CCI, but between CCI and the beginning of school the day after, this is the first time I've been able to unbox and dress the poor dears. Too much busy!

Bailey (Jude) and Kahlua (Rosanna) finally saying hello!

Jude and Roseanna by clochette62, on Flickr

 

Sooo cute! I can't wait for my Roseanna now. ❤️ Beautiful photo, and lovely tan resin!