Permanent or temporary enlarging bust size?

OK , This may sound like the dumbest thing ever ,
But,maybe make her a little bra , but instead of makeing cups for it , sew the the stuffing on it ? yknow, like those bra's made for women to try on to check what implant size they want ops:

 

O_O

..... i never thought of that. That's a REALLY, REALLY GOOD IDEA!!! I think I just might try that!

THANK YOU!

 

BlueFairy has a girls body called the "blossom" body, which is more mature than most MSD-sized girls. (Almost reminds me of a little CH girl, maturity wise.)

 

See here: http://bluefairyint.com/

It's not HUGE, but much more than MSD girls usually come with. And the resin BF uses matches Volks normal skin resin very well! ^^

Edit: See here for some comparison shots. (Shikai is the old volks resin as well.)

 

Krambear has some photos of her Jerome head on an MSD Body, if that would help. ( Her LJ ) The match really is something I don't think should be a problem at all, and the BF bodies do pose extremely well. ^^

In any case, good luck with whatever you choose! ^^

 

What about making falsies for her? Like out of AS or super sculpey...? Then putting them in the bra? I was going to do that for my boy, but haven't yet. :3 Anyway... it's just a thought. Then she could wear tight things and they would hold their shape.

 

I really like Batchix's idea of using something hard rather than cloth , cloth might look squashed if the top is too tight ,
Maybe , if you dont like sculpting get those large marbles they sell at toy stores ? LOL your girl would really look grown up with those round silicone boobies! XD or fill them up with rice , so that they stay hard ..but that would look too bumpy..

 

Wouldn't it be funny of someone started marketing some special falsies for boy dolls or little girl dolls? '_';;

The best thing I can think of is filling a little pouch, maybe plastic, with sand, and maybe a dot of glue on it for the, erm, nipple... Anything else would just look too hard 2_@; Unless someone wants to try actually making sculpy boobs... and then casting them..

.......

No, no, I make wings, not boobies ><;;;;;;; *runs away*

But Aie, I want to see the final result of this!

 

How about some of those little bitty balloons that are sold specifically as "water balloons? Use a funnel to add a measured amount of salt (or sand) then knot it close to the salt/sand. If you found white balloons you could even try tinting the balloons to skin tone. They would squish into a corset very well, I would think.

 

http://page11.auctions.yahoo.co.jp/jp/auction/n11790804

Here ya go! What you want is available right now!

 

XD OH MY GOD!

That doll looks so young... it'd be funny if some company started marketing fake, strap on boobs to young girls in real life XD... oh, warp-ed-ness XP

 

Well, I have a pair of large MSD sized breasts....but I have NO idea how to make a bra >.< so I don't know if they'd work or not (they don't exactly match either XD ) I'll try putting them in Hikaru's shirt and taking a pic

http://www.livejournal.com/users/cheshiretiffy/98512.html#cutid1

Ok the pics aren't great, I'll take better ones in the sun tomorrow.

 

This is completely unhelpful but I couldn't resist foisting this link off SOMEWHERE!

Warning!!! Doll nudity! And...unrealistic...um...proportions.
If you are easily offended DO NOT CLICK the link below!

http://www1.odn.ne.jp/~aaa68230/DOLL/79/DOLL79.HTML
(the first set of Nono13 photos she looks like she's thinking 'My back is KILLING me!')

Muahahahaha!
*skips off giggling evilly*

 

Burning does some interesting work. I like the way they do the hip joints.

 

I wish I knew how that person did it- that's what I was going for with my sharmin! but my sculpting skills were lacking XD

 

I've been asked to try to figure out how to replicate those torsos but I think it's beyond me! I can sculpt the things but casting the breastplates in resin (and keeping them hollow) is still beyond my skills.

 

HOLY COW! I wonder if she can use those as flotation devices? XD

 

From what I know about Burning, they reshape the origional SD body, then add the breasts and recast the whole thing

And speaking of making boobies, I got some better pics of those way too big ones I made last night XD

http://www.livejournal.com/users/cheshiretiffy/98697.html

 

Do you already have the MSD? I don't know if MSDs are the best for boobies.
If Unoas weren't so time consuming to buy, I'd reccomend the big bust torso.



I went from link to link and
http://sta-nyan.cside.com/original/top.html#angel
Wow... They're talented, but...

Dude... a PREGNANT 1/6?!

 

It's not a tumour.

 

aack. [ shudders ] those are madly frightening. I need to scrub my brain now.
it's funny how I've seen quite a few threads on and pictures of dollie bust enhancement, but none thus far of, well, elongating the penis. please, don't take that as an invitation to start looking, though! ops:

 

My handmade doll, Bastian, is rather well endowed. That's what happens when you let your husband sculpt it. X3 Dave's a better sculpter than I am... and I couldn't get it to look... right. XD

 

Are those new SD albow joints or did the owner cast them themselves too? All the dolls seem to have double joints at the albow other than the big boobies...

 

Have you thought of using Crayola Model Magic to make falsies? You can buy it from pretty much anywhere and it's this clay-type stuff that dries to a somewhat pliable foam. (And it smells good. *sniff sniff*) I was thinking about ways to make boobs that hold their shape without being too hard, and it was the first substance that came to mind. :grin:


~Kalmia

 

I wouldn't think so, since the stuff is white by default. It does smell kinda weird, though >.o;; But that's a really good suggestion.

 

I don't believe I've seen your Bastian...

 

Well, if you'd like this pair, you can have them. Just shoot me some shipping money and they're yours. Or I could try making you another set better balanced and smaller or bigger or whatever.

 

Yes, they make their own elbows. SDC Kaede's elbows are similar, but those are custom by Burning.

 

I second the motion. REVEAL THE PENIS WOMAN!

Azrael is WAY too small for his size, honestly... I'm thinking about going through and enhancing my boys. I asked about adding bits to a genderless doll, thats where i found out about apoxy and did my sharmin's breasts XD

 

It comes in white! :grin:


~Kalmia

 

I third. I'd like to see this custom.....wee wee hehe

 

*triples the motion* Yes So im not the onely one who thought of MALE DOLL ENHANSMENT! Of course not for my dod...but I have a paln for another I'm getting..... muhahaha.

 

DoD boys are SMALL

they need to stuff their undies with a sock.

 

But my boy is 15..id ne wrong if I 'enhanced' him.

When I get my goth boytho...buhahahaha.

I Apoxy

 

I should find some apoxy and give Freya a nose.

 

I think the Crayola Model Magic would work well. And Kalmia is right, it smells wonderful. I like to snuffle at it.

And, I too, am curious about Bastian.

 

the crayola stuff is great.. BUT you gotta watch out for cracking. and if you make something super thin chances are it will break off or chip or something. it is also hard to make excatly what you want.

i think the best cheapest way would be to make a stuffed bra. that what im doing for my doll when she comes to me. cause she has an asexual body.

 

does anyone know how to get burning's bodies? i would loooooove to get one!!!!

*snuggles*
~Ami M.~

 

as far as i know they sell them from time to time on YJ and rarely for under $1000.00

 

gooooooodness...

so not fair...

*snuggles*
~Ami M.~

 

Hello,

I'm planning to get a Soom Gena at some point this year, but she's a trifle flat for the character I have in mind for her.
I was wondering what's the best way to enlarge her bust, I like her long legs and woulldn't want to get another body for her head.

Thanks a lot~

 

http://www.denofangels.com/forums/viewtopic.php?t=4750

this thread may prove usefull. ^_^ Her Sharmin has BIG boobies now.

 

Oh, thank you! ^_^
I've PM'ed her for some more in-depth questions, and I'll be sure to post pictures eventually :grin:

 

In response to your subjectline: Please contact a licences plastic surgeon, boob jobs are not a DIY thing :wink

I would go with apoxie, and there is loads of info on that if you do a search for 'apoxie', in a thread up the top here there is also stuff about making/modifying your BJD: http://www.denofangels.com/forums/viewtopic.php?t=15808

Let it be noted that the person who built up their Sharmin eventually got a Unoa large bust which was modified to fit on Sharmin.

 

"In response to your subjectline: Please contact a licences plastic surgeon, boob jobs are not a DIY thing :wink :"
*lol* that was great! XD

Hmm, thanks for adding that about the Unoa large bust...and the apoxie thread, as well.

 

I'm getting a Kid Dollmore Aiden in the next month or so, but their bust is nonexistant. The doll is supposed to be in her twenties, though she does still look young for her age she's not meant to look that young.

What would be the best way to go about modding her a slightly bigger chest?

 

I think Apoxy would be your best bet, I think that's what some people use to modify ears into elven ears. I was considering doing it to my old MSD but was wary of ruining it. I think someone tried with her Sharmin and did kinda mangle it. ^^;

But! If you have the patience and skill I think it should work.

 

Well, it depends on what you want to make the larger bust out of. If you want it you be non-permanent, you could make a tight-fitting 'bra' that would sit over the chest. (possibly out of a skin-matching material?) It would be like a push-up.

If you wanted something more permanent, you could fashion fimo / sculpey breasts that would glue into the chest itself. This would obviously allow you to show the doll naked, but it would be permanent; no going back.

Just don't go over-board on the implants. That Nono over in Larger Dolls creeped the heck out of everybody. >_>

 

Hehehe. I don't want to go much larger, just enough that she doesn't look twelve years old. And I do want it to be permanent.

 

A friend suggested using Epoxy. Is this a good idea?

 

I think she customed a Unoa Large Breast Plate to fit on her Sharmin.

Epoxy would probably be your best bet.